classification
Microporous folded filter
 
Microporous folding filter
2017/12/21 22:30:57 阅读次数:346

Product profile
PP microporous folding filter element is made of ultrafine polypropylene fiber membrane and non-woven fabric or (wire mesh) inner and outer supporting layer. The filter core shell, central rod and end cover are fabricated by hot melt welding technology, without any adhesive, no leakage, No secondary pollution.

Product characteristics

Excellent chemical compatibility for filtering strong acids, strong bases and organic solvents

The filter membrane is foldable deep filtration, and the membrane filtration area is large.

The pressure difference is low, the ability to absorb pollution is strong, the service life is long, there are many kinds of filtering precision can be chosen.



Product technical performance
Filtering accuracy:0.1μm 0.2μm0.45μm1μm3μm5μm10μm20μm30μm50μm
Filter length:10"20"30"40"70
Filter diameter:69mm
Maximum operating temperature:When the pressure difference of 80 ℃ 1bar is over 55 ℃ at high temperature, the recommended use of support joint is recommended.
Maximum allowable pressure difference: 4.0 bar room temperature

Maximum allowable contrast: 2.0 bar room temperature
Temperature of disinfection : 121 ℃ , 20 minutes each time , 5 times
Material: PPPE Pesp, PTFE, PVDF, nylon

Areas of application:

Pharmaceutical Industry: Pre-filtration of various antibiotics and other drugs

Food and Beverage: filtration of Liquor, Mineral Water and drinking Water

Petroleum Industry: oil Field Water injection filtering

Electronic Industry: high Pure Water Pre-filtration

Chemical industry: filtration of organic solvents, acids and lye



   
Previous:无 next:无
  • Index| About| Equipment| Products| News| Honer| Online| Contact|
    • Copyright © ZHEJIANG SUITA 2017-2018 All Rights Reserved | 浙ICP备18014097号-1 | Technical support:YINHUWEB
    • links | sitemap